![]() | This is an archive of past discussions. Do not edit the contents of this page. If you wish to start a new discussion or revive an old one, please do so on the current talk page. |
Archive 1 | Archive 2 | Archive 3 |
Does anyone know if/how much JIS B series is used outside of Japan? I went to a seemingly experienced print shop here in New Zealand and asked if they knew what JIS B series paper was, and they said they only know international standard sizes (i.e. ISO 216). When I ordered them to cut 500 sheets of B4, I measured it later and it matches JIS B4 rather than ISO B4.
Is JIS B series being silently spread as 'regular' B series? Leedar ( talk) 03:44, 13 January 2008 (UTC)
I read in the article that outside of Canada, USA, and Mexico, "Elsewhere in the world, paper and other stationery in U.S. sizes is not easily available." However being a frequent traveler to many countries in Latin America, I know that many countries there use the U.S. sizes. In Brazil, both paper sizes can be bought in the store. In Chile and Colombia, the standard available in stores is the US standard, not the ISO standard. Same with Costa Rica. By contrast, in Peru, A4 is the commonly available size.
I edited the article to try to make it more accurate according to my first-hand experience in Latin America and added some evidence through citations. What I had actually come to the article to find was a table of countries vs. the availability of common paper sizes there so that when I send them electronic documents -- for which I make a separate "Letter" size and an "A4" size, I know which size document to send to which country.
I am currently writing from Mexico, where I can confirm that the US sizes are the only paper sizes available commonly in stores and people generally do not know what "A4" size means. Kevin 01:20, 14 June 2007 (UTC)
Looks like about 7 too many significant figures on lb/in^2. —Preceding unsigned comment added by 65.96.191.131 ( talk • contribs)
Is tabloid the same as ledger for US paper sizes? And would this be an appropriate footnote to the table? -- Ansible
Does anyone else use the same size paper as in the USA? -- Ansible
Below is from American Forest & Paper Association website: http://www.afandpa.org/Content/NavigationMenu/Pulp_and_Paper/Fun_Facts/The_U_S__Standard_Paper_Size.htm
Why is the standard paper size in the U.S. 8 ½" x 11"? Back in the late 1600's, the Dutch invented the two-sheet mold. The average maximum stretch of an experienced vatman's arms was 44". Many molds at that time were around 17" front to back because the laid lines and watermarks had to run from left to right. Sounds big?...well to maximize the efficiency of paper making, a sheet this big was made, and then quartered, forming four 8.5" x 11" pieces.
This was well before paper machines dominated hand made paper labor. A couple centuries later when machines dominated the trade (although many hand made paper makers still existed), and the United States decided on a standard paper size, they stuck with the same size so as to keep the hand made paper makers in business.
Oddly enough, the United States used two different sizes - the 8" x 10.5" and the 8.5" x 11". Separate committees came up with separate standards, the 8" x 10.5" for the government and the 8.5" x 11" for the rest of us. Once these committees found out about each other a couple years later, they agreed to disagree until the early 1980's when Reagan finally proclaimed that the 8.5" x 11" was the official standard sized paper.
United States History
Not until World War I or shortly after was a standard paper size agreed to in the United States. Interestingly enough, within six months of each other, two different paper sizes were set as the standard; one for the government and one for the rest of us.
1. In 1921, the first director of the Bureau of the Budget established an interagency advisory group with the President's approval called the Permanent Conference on Printing which established the 8" x 10½" as the general U.S. government letterhead standard. This extended an earlier establishment made by the former President Hoover, the Secretary of Commerce at the time, who established the 8" x 10½" as the standard letterhead size for his department.
2. Now, during the same year, a Committee on the Simplification of Paper Sizes consisting of printing industry representatives was appointed to work with the Bureau of Standards as part of Hoover's program for the Elimination of Waste in Industry. This group came up with basic sizes for all types of printing and writing papers. The size for "letter" was a 17" x 22" sheet while the "legal" size was 17" x 28" sheet. The later known U.S. letter format was these sizes halved (8 ½" x 11" and 8 ½" by 14").
Even in the selection of the 8 ½" x 11", no special analysis was made to prove this was the optimum size for commercial letterhead. The Committee that developed the sizes did so using one objective - "to reduce inventory requirements for paper into sizes which would cut from a minimum trimming waste."
References: 1. Labarre Dictionary of Paper and Paper-Making Terms, 1937 Edition.
2. Kuhn, Markus . 1996. http://www.cl.cam.ac.uk/~mgk25/iso-paper.html
3. Dunn, A. D. 1972. Notes on the Standardization of Paper Sizes. http://www.cl.cam.ac.uk/~mgk25/volatile/dunn-papersizes.pdf
So to wrap up this discussion... The answer to "Wo uses non-ISO paper?" is "Inhabitants of the U.S, Canada and Mexico", right? Shinobu 10:44, 7 July 2006 (UTC)
More importantly, why won't the US implement ISO standards? 59.154.26.124 07:22, 24 October 2006 (UTC)
Given the existence of the ISO 216 article, I think the corresponding information in this one should be deleted with a reference to that one. It might be worthwhile to have historical information about pre-metric paper sizes. 18.24.0.120 00:32, 25 Jan 2004 (UTC)
I think the neatest solution would be to have the sizes and "basics" in both articles (using transclusion if that's the only way), while moving the historical discussion to the ISO-216 article. Shinobu 10:59, 7 July 2006 (UTC)
Seems that The USA et. al. just like to be different. I mean no one else in the world uses Imperial measurement any more - GET WITH THE TIMES PEOPLE!!!! —Preceding
unsigned comment added by
121.223.35.43 (
talk)
09:03, 31 October 2007 (UTC)
The term "Traditional paper size" does not parse very well without mentioning regions. Would it be better to rename the section 'Regional paper sizes', 'Historical paper sizes' or something else?
Would 'Old British and American Paper Sizes' be better?-- Moncubus 23:53, 11 October 2006 (UTC)
ISO 216 defines only the A and B formats. ISO 269 defines the C series for envelopes. The current table with standard paper sizes also lists curious D and E formats. However, none of these formats is defined in any of the ISO or national standards for paper or envelopes that I have consulted. Unless someone can add a detailed source reference for these formats, I propose to remove them. Markus Kuhn 09:04, 17 May 2005 (UTC)
A request for those who are watching this article, and any passers-by: I came here looking for information on what the paper size legal is used for, and in which circumstances it is preferred over letter. If/when this is added, legal should be made into a disambiguation page pointing here. arj 23:26, 12 Jun 2005 (UTC)
Do we really need that here? It seems rather far fetched, and there were good reasons for using certain keyboard layouts during the age of typewriters and there will always be different keyboard layouts because different languages use different character sets (German QWERTZ keyboards also have keys for äöüß, for example). Paper sizes, on the other hand are always pretty arbitrary, there is no fundamental reason why a certain size should not be a few millimeters larger or smaller, but the special thing about ISO is the relationship between different sizes (rather than the sizes per se). I would suggest to remove the comparison to keyboards. Dontaskme 19:36, 15 September 2005 (UTC) I agree the qwerty reference is inapropriate, and seems to indicate more about the author's pet peves than paper size. Also, might this article be a little too focused on photocoppiers, seperate from other forms of printer? Richard Daly 21:53, 12 October 2005 (UTC)
After reading the paragraphs leading up to the table of A, B, and C size comparisons, it seems to me that either the numbers in the A column are too small, the numbers in the B and C columns are too large, or the information in the previous paragraphs is misleading. By my understanding, (which is limited to the content of the article,) B and C should actually be smaller than A. Honestly, though, I could be wrong, as I know nothing about the paper standards. However, if I am wrong, then something about the article needs to be clarafied. Could someone explain this? telekid 12:34, 3 January 2006 (UTC)
"Uncut ream weight:
In countries using US paper sizes, the weight in pounds for an uncut ream (500 sheets) is used, so to compute the weight per area, one must know three (or four) quantities: 1. The weight of a ream. 2. The number of sheets in a ream. 3. The uncut dimensions of a sheet of paper. 4. The conversion factors between avoirdupois pound and gram (1 lb ≈ 454 g) and between square inch and square metre (1 m² ≈ 1550 in²): 1 lb/in² ≈ 7037 g/m².
For example, a "20 pound ream of Letter paper" has a weight of only 5 pounds because uncut dimensions are twice the cut dimensions. Since the cut dimensions are 8½ in × 11 in, the uncut dimensions are 17 in × 22 in. Therefore paper weight per area of this type of Letter is:" What in the world does the author of this article mean when he says the words "Cut," or "Uncut?"
Nowhere in the article does the author say what those mean. I don't have a clue of what this guy's talking about when he says these words, so I haven't the slightest about what he's talking about. Could someone please get this edited? I just had to sign in with a new account just to point this out. -- Pz.Az.06Maus 00:26, 8 January 2006 (UTC)
Hewlett Packard and other printer manufacturers have been selling wide format inkjet (don't know about laser) printers for the past few years that can handle up to 13x19 inch paper. I've seen this size available in many office supply stores and it's also available from a large number of online sources. 330.2 x 482.6 mm are the metric dimensions. Not even close to any of the A series divisions of an A0 sheet.
(these sizes are common in photography, and with the advent of digital cameras and decent home printing comes a whole new set of page sizes. The article links to these.)
"Porstmann's system was introduced as a DIN standard in Germany in 1922, replacing a vast variety of other paper formats, and by 1940 it had been adopted by some 10 additional countries."
It would be interesting to know which countries adopted this standard when. Since 1940 was during WWII there is although the question whether the countries which were occupied or annexed by Germany at that time are in that count, too and if so whether they just kept this standard after war. 129.13.186.1 13:15, 2 March 2006 (UTC)
where did the legal size originate...is its or was its use enforced in some courts?
I've recently been looking the exact size for the oversized paper sizes used in printing processes where you want print to the edge. But I can't seem to find those sizes anywhere. Is this because there's no exact standard, or is just not here because the author doesn't have the knowledge of this?
that image confused me... a2 is equivalent to 4 a4 pages... (ISOA) but that diagram seems to indicate that a3 is equivalent to 4 x a4 pages.. the orientation of the a4 segment of the diagram seems wrong..
From the article:
QUOTE:
ISO paper sizes are all based on a single aspect ratio of the square root of two, or approximately 1:1.4142. Basing paper upon this ratio was conceived by the German scientist Georg Lichtenberg in 1786 (in a letter to Johann Beckmann),
END QUOTE
But in the letter:
QUOTE:
Having found that ratio, I wanted to apply it to an available sheet of ordinary writing paper with scissors, but found with pleasure, that it already had it. It is the paper on which I write this letter, but to which, because since by cutting some of its original form may have been lost, I also add an uncut original. The short side of the rectangle must relate to the large one like 1 : √2, or like the side of a square to its diagonal.* This form has something pleasant and distinguished before the ordinary [form]. Are these rules given to the paper makers or has this form spread through tradition? Where does this form come from, which appears not to have emerged by accident?
END QUOTE
So it seems that paper had a 1:√2 aspect ratio traditionally even before Lichtenberg.
It would be nice to have an additional drawing, to better visualize the core difference between ISO and US formats. Draw several ISO paper formats in portrait orientation on top of each other, with the bottom-left corner of each page aligned on the same point. Then draw a single red line through all the top-right corners, to visualize that all formats have the same aspect ratio. In a second figure, try the same for U.S. Letter (8.5"x11") and its multiples and divisions (11"x17", 17"x22", 5.5"x8.5", etc.). It will then become obvious (and can be indicated with two red lines through all the top-right corners) that such a series alternates between two different aspect ratios. Markus Kuhn 12:10, 6 July 2006 (UTC)
Don't you guys think it would be better to put the american sizes in the image for comparison? There was the old yellowish image with the american sizes. The current blue one doesn't have the american paper sizes. -- Quaestor 03:30, 7 July 2006 (UTC)
Well, since it looks like the new image is going to have just the A-sizes, I have moved it down and replaced the comparison image at the top. It is very useful for understanding the relative sizes of A4, Letter, and Legal. - SCEhard T 01:31, 28 September 2006 (UTC)
Are there any standards for paper thickness and/or density ? It appears that index cards and printer paper have a consistent thickness, while stationery seems to have a wide variation.
The misleadingly-titled section " Paper_size#Expressing_paper_thickness_and_density" doesn't say anything about thickness, except to say that "the product of thickness and density of paper is expressed in grams per square metre (g/m²)". (Which seems to me to be a bit misleading -- I suspect manufacturers measure the weight and divide by the area, rather than measuring the thickness *and* measuring the density and then multiplying).
From the "grammage", it's impossible to calculate the thickness unless you already know the density. You cannot use the density of pine wood (less than 1000 kg/m^3), because I hear that nicer paper has "a lot" of clay (more than 1000 kg/m^3) added to make it more opaque.
"Thickness is normally expressed in inches or millimeters, but can also be measured in points, where 1 point = .001 inches."
Yes, but what specific thickness(es) are standard? Or at least typical? One sheet of 80gsm paper is about 0.09mm thick (measure a 500 sheet ream's thickness and divide by 500).
Why "grammage"? Whose invention was this? An economist's no doubt. Before Australia converted to the international sizes, we (and printers elsewhere I'm sure) referred to the "weight" of paper, and that was carried through to the A and other series. The "age" suffix is now being unnecesssarily added to everything, either as an adjective or to denote a plural. So we get signage instead of signs and so on - I've even heard "lackage". There is a place for it, but not in this sense, nor in most instances where it's now comonly used. so we have paper that is A4 size with a weight of 80 gsm.
This whole article is getting bloated, posted merge paper weight section to
Basis weight of paper as paper size and paper weight are two different issues (well, mostly).
MDSNYDER
04:11, 28 March 2007 (UTC)
I know that Leonardo DaVinci is the inventor of the defined paper sizes used today. I wonder why no mention is made of him in the page...
Do you have any source for this? It certainly should be added if it's true.
Moncubus
19:33, 8 October 2006 (UTC)
Why use ½ and .5 interchangeably? It makes it harder to search through the page. If I'm looking for 8½, I also have to type in 8.5. This doesn't make sense to me.
The written commentary regarding "A4 Paper in the United States" is noncomplient with Wikipedia's standards, not to mention poorly written. Of particular note is the unabashedly opinionated statement, "Due to the widespread use of Letter paper size, adopting A4 paper size is quite impractical in the United States." A false presumption based on a conservative stance certainly has no place here. The entry is made worse through its inclusion of arbitrary, indeterminate phrases such as "not many", "often", and "sometimes". It sounds more like an angry, defensive rant than an entry in an encyclopedia.
My school in Hong Kong regularly uses F4A paper (216cm * 343cm). Does anyone know if it common throughout Asia? The only reference I have found on the web so far has been at (sorry to link to a commercial site): http://www.bigboxx.com/shop/...
Should this paper size be added to the main page?
I've see references to sizes like Letter Plus, Legal Extra, A4 Plus, etc. but no mention of those in the article. See Zan Paper sizes for an example. (The reason I found this article in the first place was that I wondered what size paper a particular printer supported, since the blessed sellers instead of stating max length and width listed a bunch of obscure paper sizes.) Letter Plus is a little longer than Letter, Letter Extra is one inch extra on both sides. A4 Plus adds some length, and A4 Extra adds some margin on both sides.
Where do these extra sizes come from? Invention of printer makers, software makers, some industry group, or what? In my google search, "Letter Plus" paper sizes yielded mostly Microsoft API references, and technical documentation for certain printer brands.
- The 'extra' sizes are what we use here at work for generating a PDF that has room for cropmarks, trim and registration, etc. In other words, A4 will be the usual 210 by 297, which is the final trim size of the artwork, whereas the A4 Extra size will add (about 25mm on each side? not sure) all around the trim dimensions so that the page is now big enough to accomodate the crops and reg marks too. Ian Tindale 15:46, 22 February 2007 (UTC)
The article alludes to the fact that using an aspect ratio of radical two has advantages, but it does not spell out these advantages. I think it would be well worth expanding on this point in the article. WilliamKF 23:59, 18 January 2007 (UTC)
A long time ago I improved (IMHO) and extended the series of paper size illustrations and you might want to have a look at it. Here's what's available:
As someone pointed out, there is probably no need for both A series images in the same article. — Bromskloss 09:06, 5 April 2007 (UTC)
The paragraph explaning the comparative sizes of the A, B and C series is accurate, but not obvious. An image showing the comparative sizes would be useful IMHO. (perhaps just by overlaying, for eg, C4 and B4 onto the A-series sheet, in a similar way to the A-series image with US paper sizes overlay? -- Nemo 04:48, 18 July 2007 (UTC)
-- 124.188.225.17 02:38, 26 May 2007 (UTC)
Hey there...this may be a stupid question, but it bares asking.
I came here looking for the size 5 x 8 to see what it is called, and nothing. Why is this? I have a book I just measured that is about 5 and 1/3 by 8 inches. Why is that size not here? 5.5 by 8.5 is here, but this book is exactly 8 inches across. Are there paper sizes that people just come up with to use for no reason? Or did this books publisher use a paper size they thought was standard, and therefore should be on here?
Thanks Rob 03:19, 4 August 2007 (UTC)
In the same vein, I could not find reference to two other sizes in common use:
210 mm * 270 mm used to be the standard business page size in France (and possibly elsewhere) until the A series took over for most cases. And 240 mm * 320 mm is still the most widespread paper format for hand drawing. Did I miss something ? Even today, I can still find these sizes being required for pupils in the public school system —Preceding unsigned comment added by 193.252.205.217 ( talk) 11:43, 13 August 2008 (UTC)
"Imperial sizes were used in the United Kingdom and its territories." Well, yes. But doubtless they were adopted in at least a few other places? Rich Farmbrough, 10:49 20 August 2007 (GMT).
I have "thrown in" a list of paper sizes I made some time ago. If someone can pretty up the tables it would be good. Rich Farmbrough, 10:56 20 August 2007 (GMT).
I noticed the following two paragraphs in the Tablet sizes section:
These paragraphs sound to me like a Wikipedia editor went into a few stationery shops and looked around and wrote up their findings. This would constitute original research and does not belong here. On the other hand, if these observations were part of a study or something that has been reported in a publication, then this should be cited. Does anyone know the source of the information in these paragraphs? — Bkell ( talk) 04:00, 25 October 2007 (UTC)
To quote: The largest standard size, A0, has an area of 1 m². Aren't B0 and C0 bigger? -- Clum ( talk) 10:23, 13 January 2008 (UTC)
Today I printed something and now my printer is asking for size "K16" paper, which I didn't know existed, and don't find any reference to on Wikipedia. I did find this link to a Xerox user manual [5] that refers to size K8 and K16 paper and seems to imply they are Chinese in origin or use. From the manual (pg 3-10):
Indicate your language preference to enable the set of 8K and 16K paper sizes that is best suited to your needs. If you select "Traditional Chinese," the dimensions of the 8K and 16K paper sizes are 267 x 388mm and 194 x 267mm respectively. If you select "Simplified Chinese," the dimensions will be 270 x 390mm and 195 x 270mm respectively.
Can anyone comment? --
Mr Minchin
17:48, 25 January 2008 (UTC)
It might be noteworth to mention at the main article that Jeppesen, (the de-facto publischer of aeronatical charts worldwide) use the 5-1/2" x 8-1/2" paper -half letter- half letter format. (punced with 7 holes). This information is not well known for outside the US, and very handy to know for i.e. 'poor men' flight simmers. —Preceding unsigned comment added by 84.28.9.104 ( talk) 12:05, 22 February 2008 (UTC)
In literature on book design (concretely the series Nordisk boktryckarekonsts fackbibliotek, which is in Swedish and published 1903–1957, so it's probably not useful as reference here), I've seen claims that page proportions given by successive Fibonacci numbers were used (as approximations of the golden ratio), concretely 8/5=1.6, 13/8=1.625, and 21/13≈1.615. None of the paper formats listed on this page seems to be close to that, however. They needn't be, of course, since books are made from bigger sheets of papers which are folded and then trimmed, but it would be interesting if someone could provide a concrete example of how one might arrive at a golden ratio proportion page starting from one of the listed sheet sizes. 81.231.33.12 ( talk) 12:28, 4 April 2008 (UTC)
Ref: BS 1112:1972 —Preceding unsigned comment added by Mikehimself ( talk • contribs) 17:23, 20 August 2008 (UTC)
Whole Plate - 6-1/2" x 8-1/2" - based on the size of the standard glass photographic plate.
Half Plate - 6-1/2" x 4-3/4" - wider than half the "plate" size, to preserve the proportions.
Quarter Plate - 3-1/2" x 4-1/2" - a quarter of "plate" size plus a printing margin.
Postcard - 3-1/2" x 5-1/2" - a convenient ratio for seaside views and also allowing the reverse be divided into two to provide space for a message and the address.
With the advent of commercial photo printing 4” x 6”and 5” x 7” were introduced, to allow full-frame prints to be made from 24mm. x 36mm. negatives on 35mm. film. This 2/3 ratio came about because the early Leica cameras were designed to use two 18mm. x 24mm. frames of standard movie stock. Later attempts to introduce more harmonious proportions for miniature cameras gained a small following but always failed because the industry was so heavily committed to the 24 x 36 format. Mikehimself ( talk) 07:54, 19 August 2008 (UTC)
It is interesting to note that although digital cameras use the 3/4 ratio (the same proportions as a standard computer monitor) most prints are still made on 4" x 6" (10 x 15cm.) paper, resulting in some cropping of the image. Mikehimself ( talk) 08:14, 19 August 2008 (UTC)