![]() | This article is rated Start-class on Wikipedia's
content assessment scale. It is of interest to the following WikiProjects: | |||||||||||||||||||||||||||||||
|
![]() | This article links to one or more target anchors that no longer exist.
Please help fix the broken anchors. You can remove this template after fixing the problems. |
Reporting errors |
There's a lot of errors of detail and exaggeration in this item. If you have any queries about said errors, please contact 01189320939.
Eg the footnoted ref to the importance of GC-45 in the Gulf War, Iraq had a lot of artillery, most of it of Soviet origin, with a few from other countries including France. GC-45 was just a small part of this arty array.
39 cal 155 is not a NATO standard. NATO agreed to use 155mm. In 1963 4 member nations agreed to a ballistic MoU that gave a specification for a 39 cal barrel. First users were M109A1 (different to M109), M198 and FH70.
Ref to accuarcy of GC-45 being as good as M109 but at far longer ranges. Accuracy has little to do with gun design, its actually about the ballistic model and data used to compute firing data. Consistency/dispersion is another matter all together. —Preceding unsigned comment added by Nfe ( talk • contribs) 03:51, 23 October 2007 (UTC)
I spent aa quiet 10 minutes today examining a towed 155mm, the original plates on it gave the designation "GN C 45". Unfortunately I didn't have a tape measure so couldn't measure the barrel length, also all serial numbers had been scraped from the plates.
However, this gun had: No auxiliary engine and nothing to suggest it had ever been fitted with one. A rifled barrel. A breech that looked like a direct copy of M109.
It was nowhere near as sophisticated as FH70 (I examined one of these last month), all in all a very ordinary gun, I'd describe it as the sort of thing done in the 1950s.
I understand this gun came from Iraq in 1991. Nfe ( talk) 07:33, 18 November 2007 (UTC)
I'm not sure I understand the debate about the rifling here: of course they are rifled, the issue is how they are rifled. The G5 is "reverse rifled" compared to a conventional non-ERFB gun. Scroll down in quoted source (above) and look at the ammunition. You can see the "driving keys" quite clearly on the ammo. These fit into the slots in the barrel. Nor does the article imply that the gun is not rifled, on the contrary it states very clearly "...boring out the barrel to a smoothbore, cutting the new rifling into it...".
Furthermore, the accuracy of the GCN-45 is not a side effect of the gun, but the ammunition and powder. Again, the article states this pretty clearly. The lower supersonic drag means that winds and other atmospheric effects have that much less effect on the trajectory, and because of the long flight times (and distances), ERFB rounds tend to drop almost vertically on their targets (check out images on the 'net of the M777, for instance). The quoted reference has the numbers, you can compare them with the M109 at your leisure.
Finally, the 155/39 is the defacto NATO standard. Older US, Canadian, Belgian, French, German and UK systems were all based on the same ammunition and loads developed for the M109 or M198, representing almost all of the 155 artillery in NATO service. While it is true that these systems are all in the process of being replaced, that's also something the article states pretty clearly.
Maury ( talk) 19:08, 26 January 2008 (UTC)
Having peered up the barrel and knowing what I was looking at I can safely say that the rifling is entirely conventional, although without looking at the gun handbook I couldn't say what shape of groove was used but that's a very esoteric detail will minimal effect (its mainly to do with loading on the lands to prevent them stripping). Like any other other rifled barrel it has grooves and lands, and these were similar in size to other guns (you'd need good instruments to measure any differences). The lands and groove impart spin to the projectile via the driving band, which also provides a seal to prevent charge gases seeping around the shell as it moves up the barrel, it also holds the shell in position when it has been rammed so that it doesn't slide back before it is fired.
What the EFRB shells do have are nubs on the ogive, these are necessary to stop the shell wobbling as it goes up the barrel. They are a consequence of the highly sreamlined shell shape. Normal shells don't have them. These nubs have nothing to do with rotating the shell as it moves up the barrel. Reference to boring out a 155mm barrel then cutting new grooves is nonsense, for starters it would no longer be 155mm (and 155mm isn't 6 inches either).
Talk of all 155mm having the same 'loads' as M198 or M109 is twaddle. The US system of Green, White and Red bags is totally different to that used by GE, IT, UK with FH70, which uses a completely different charge system with triple base propellant. AS90 also uses this. Incidentally the first 155mm ever developed by UK was AS90, I don't think Canada has ever developed one either.
Drag has nothing much to do with wind, and the effect of head wind is relatively small. Cross wind is a bit greater because it has a larger area to work on. Ammunition design doesn't have much effect (if any) on accuracy although quality control in manufacture does, if the projectile is slightly different to the standard for which the data compiled then self evidently the shell won't go where it was aimed. That said wind, temperature, shell weight and other factors are all taken into account when computing firing data. As I previously said accuracy is a function of the ballistic model and the quality of data, both the basic aeroballistic data and the data for conditions of the moment.
Can't see how shell shape can have any affect on angle of descent. This is basically determined by angle of departure, but is steeper basically due to the accumulative effect of air resistance (in vacuo a shell has a completely symetrical trajectory). It might be argued that other things being equal a more streamlined shell has a less steep angle of descent because air resistance is less (but I don't think other things can be equal).
Incidentally the article is supposed to be about the gun. The EFRB ammo can probably be used with any 155mm. It's just that most western armies are supported by competant scientists to cut thru the BS and have decided that EFRB shells aren't worth the bother, basically due to their inherent payload capacity limitations. Nfe ( talk) 12:10, 27 January 2008 (UTC)
Only just noticed this post,which misunderstands/mis-represents of NATO 155
The 1964 MoU that established the 39 cal barrel was an agreement between a handful of nations, it was never a STANAG and is therefore not a NATO standard. It also establlished the M549 RAP as the baseline size/shape/weight shell (its significantly longer than M107) and the requirement for a burst rate of fire (3 in 15 secs). In the following decade it led to 3 new guns (M109A2, M198, and FH70, with the FH70 barrel being used in M109G. Only FH70 fully conformed to the agreement, and FH70 also had a new ammo family conforming to the agreed shell form factor, the HE shell holds over 11 kgs of HE (and the new US HE shell is only a bit less). The streamlined shape of EFRB also limits its capacity as a carrier shell.
The design of a gun does not greatly affect it's accuracy (if at all), accuracy is a measure of how far the mean point of impact is from the aimpoint. The only gun dependent factors are operating not inherent, eg that the sights are correctly aligned. Accuracy is determined by the accuracy of the aeroballistic data (itself the product of the quality of range and accuracy firings and subsequent data analysis), the accuracy of the data for non-standard conditions (eg the current meteorological conditions, the muzzle velocity), the accuracy of the ballistic calculations of firing data (not generally a problem today) and the accuracy to which the gun is surveyed and oriented.
Dispersion is a different matter, this is the spread of shot around the mean point of impact. Ignoring human error/variation in laying, dispersion is somewhat affected by moment to moment variations in meteor (which basicallly means gusting wind and really is marginal) but mostly in round to round variations in muzzle velocity. The main cause of these are the accepted tolerances in ammo production. Round to round variation in jump is also a factor (but usually well less than MV), jump itself is small, typical only a few mils with modern guns and has both barrel and carriage components but carriage usually dominates. Obviously the round to round variation in jump is very small.
Shell angle of descent (in low angle fire an elliptic trajectory) depends of the range and the charge. At close to maximum range for a charge it is always very steep. In high angle fire (parabolic trajectory) it is always steep throughout its range.
Bull is grossly overated. Basically he didn't like working within the constraints of compatibility with existing guns and ammo, had a hissy fit and took the easy way by starting with a blank piece of paper. Plenty of other gun designers could have done exactly the same thing, but it was not what their clients wanted. The real challenge of gun design in the second half of the 20th century was a sliding block breach for bagged charges, computers made playing with permutations of existing ballistic knowledge very easy. Nfe ( talk) 04:46, 11 July 2008 (UTC)
This is mostly fiction as well. 52 calibre barrel with 23 l chamber is the creation of a 5 nation JBMOU agreed c.1990. Reportedly most of the work on coming to this particular solution came from RARDE in UK, and UK seems to have built the first trial barrel. The shell form remains that agreed c.1964 as part of the 39 calibre BMOU, ie the shape of the M549 RAP. BB was, of course, created in Sweden. Nfe ( talk) 12:16, 1 September 2009 (UTC)
The article states that the Soltam 845P and the ODE/STK FH-88 are GC-45 'clones'. However, the linked source does not agree:
From the GC 45 came several other L/45 guns. The Chinese WA 021 is a virtual clone of the Austrian GH N-45, while the South African G5 started life as a GC 45 derivative but has been refined to the point where it may be regarded as a virtually new design.
Other L/45 guns include the Israeli Soltam Model 845P and the ODE FH-88 from Singapore. Another L/45 design, but of a new generation, is the SRC FGH-155, which at present exists only in prototype form. SRC is the latest configuration of the old Space Research Corporation of Quebec and at present has its main office in Belgium, although much of the actual hardware development is being carried out in Spain and elsewhere.
My reading is that the WA 021 and the G5 are derived/cloned from the GC-45, but that since the 845P and FH-88 are mentioned with an SRC prototype not derived from the GC-45, they are L/45 guns but not GC-45 'clones'. Views on this? — Preceding unsigned comment added by 220.255.1.102 ( talk) 09:07, 10 May 2012 (UTC)