This article is within the scope of WikiProject Chemicals, a daughter project of WikiProject Chemistry, which aims to improve Wikipedia's coverage of chemicals. To participate, help improve this article or visit the
project page for details on the project.ChemicalsWikipedia:WikiProject ChemicalsTemplate:WikiProject Chemicalschemicals articles
This article is within the scope of WikiProject Occupational Safety and Health, a collaborative effort to improve the coverage of articles related to
occupational safety and health on Wikipedia. If you would like to participate, please visit the project page, where you can join
the discussion and see a list of open tasks.Occupational Safety and HealthWikipedia:WikiProject Occupational Safety and HealthTemplate:WikiProject Occupational Safety and HealthOccupational Safety and Health articles
6. Handbook of Chemistry and Physics, 71st edition, CRC Press,
Ann Arbor, Michigan, 1990
While doing a general clean up, I found the above ref in the article; it appeard uncited. Please replace or discard as appropriate. Kind regards —Encephalon22:36, 6 March 2006 (UTC)reply
Aluminium chloride is listed as an ingredient in many anti-perspirants yet this is not addressed in the article. Could someone add this, please?--HraefenTalk04:38, 10 July 2006 (UTC)reply
Yes, we should have a mention: the page is linked from
deodorant and
hyperhidrosis. The product used in many (if not all) antiperspirants is a mixed chloride-hydroxide, so this would have to be explained... I might even get round to it myself! --
Physchim62(talk)14:44, 11 July 2006 (UTC)reply
What about the other Aluminum Chlorides?!
What of the other aluminum chlorides? There is AlCl, AlCl2, and the Aluminum chloride hexahydrate. These are just a few I can think of; I'm certain there is even more. The way the article is constructed, one could think that no other aluminum chlorides exist! —Preceding
unsigned comment added by
71.208.83.158 (
talk •
contribs)
Actually, the article DOES talk about AlCl in the lead, even providing a reference:
Aluminium also forms a lower chloride, aluminum(I) chloride (AlCl), but this is very unstable and only known in the vapour phase.[1]
There is no explicit mention of the hexahydrate in the lead, that should be rectified, although the chembox clearly describes the properties of the hydrate.
As for AlCl2, I've never heard of such a thing, or any other chlorides of aluminium. If you can provide a reference that describes it, I'll gladly add the content into the article, if you like.
Walkerma02:34, 2 June 2007 (UTC)reply
Topical medical application
I'm not 100% sure but I'm pretty confident that aluminum chloride has uses as an Anti-Hemorrhagic agent. I had an ingrown toenail removed recently and when the podiatrist cut off the granulation he applied a solution called Lumicain, whose active ingredient is aluminum chloride, to stop the bleeding. I also found on this website (
http://premium.hpodemo.com/common/adam/DisplayMonograph.asp?storeID=2174E645301D4D3E9683D7D6E5507C28&DocID=41_002607) that aluminum chloride "precipitates tissue and blood proteins causing a mechanical obstruction to hemorrhage from injured blood vessels". Can someone with a little more knowledge please confirm this and update the article if necessary? Thanks
GA sweeps review
I am reviewing this article again as part of the
GA sweeps process for
WP:WGA, since this article was passed in December 2005, in the early days of the GA program. But having reviewed it again, against the newer, revised
GA criteria, I think it still passes the criteria, and will be kept.
There's still a couple of minor issues that could be tightened up a bit. The lead section has gotten a little long, and some of that content could be merged into subsequent sections, possibly chemical properties? Plus, the precautions section is rather short, and only one sentence long; maybe this should be merged with another section? Plus, it seems more like something that you'd find in the MSDS instead of an encyclopedia. Perhaps rewording and moving it might make the article a bit better? I think there might also be a few gaps in the referencing/sources as well; nothing too major, but a few more references couldn't hurt (specifically, 'uses' and 'chemical properties').
From the technical perspective, the article has some gaps. I was surprised to see an image of yellow aluminium trichloride. I am no superexpert in Al chem, but a bright yellow form of AlCl3? Possibly Fe(III)-contamination? The applications tend to focus on academic themes. I think that alkylation of benzene is bigger than acylation and there are other apps that are more prosaic. Anhydrous AlCl3 is also prepared by carbothermal routes also. The relationship to
aluminium chlorohydrate merits a some greater explanation about the structural and chemical trends.--
Smokefoot (
talk)
12:40, 6 August 2010 (UTC)reply
9 solubility entries
Is there any particular reason to list the (slightly varying) solubility of aluminium chloride in water at nine different temperatures? In my opinion one solubility at standard conditions ought to be enough. Instead the solubilities of other aluminium chloride compounds should probably be added. — Preceding
unsigned comment added by
193.113.135.112 (
talk)
10:31, 20 September 2011 (UTC)reply
Toxicology is meaningless for a chemical compound that is highly reactive with water. The section titled "Precautions" is sufficient to cover the safety aspects of handling this compound.
ChemNerd (
talk)
20:39, 16 May 2013 (UTC)reply
The comment(s) below were originally left at Talk:Aluminium chloride/Comments, and are posted here for posterity. Following
several discussions in past years, these subpages are now deprecated. The comments may be irrelevant or outdated; if so, please feel free to remove this section.
Comment(s)
Press [show] to view →
The following suggestions were generated by a semi-automatic
javascript program, and might not be applicable for the article in question.
The lead of this article may be too long, or may contain too many paragraphs. Please follow guidelines at
WP:LEAD; be aware that the lead should adequately summarize the article.[?]
Consider removing links that add little to the article or that have been repeated in close proximity to other links to the same article, as per
Wikipedia:Manual of Style (links) and
WP:CONTEXT.[?]
Per
Wikipedia:Manual of Style (numbers), there should be a non-breaking space - between a number and the unit of measurement. For example, instead of 100 ml, use 100 ml, which when you are editing the page, should look like: 100 ml.[?]
Per
Wikipedia:Manual of Style (numbers), please spell out source units of measurements in text; for example, the Moon is 380,000 kilometres (240,000 mi) from Earth.[?] Specifically, an example is 100 ml.
Please make the spelling of English words consistent with either
American or British spelling, depending upon the subject of the article. Examples include: behaviour (B) (American: behavior), aluminum (A) (British: aluminium), aluminium (B) (American: aluminum), ization (A) (British: isation), catalyse (B) (American: catalyze), hydrolyse (B) (American: hydrolyze).
Watch for
redundancies that make the article too wordy instead of being crisp and concise. (You may wish to try Tony1's
redundancy exercises.)
While additive terms like “also”, “in addition”, “additionally”, “moreover”, and “furthermore” may sometimes be useful, overusing them when they aren't necessary can instead detract from the brilliancy of the article. This article has 8 additive terms, a bit too much.
Last edited at 22:59, 2 June 2007 (UTC).
Substituted at 07:28, 29 April 2016 (UTC)
mp/bp inverted?
melting point at 192 and bp at 160?
Unlikely - boiling point does not need to exceed melting point in case of sublimation/decomposition (they are measured in different conditions in such cases).
Materialscientist (
talk)
09:01, 25 March 2017 (UTC)reply