The F7 was the fourth model in GM-EMD's successful line of
F-unit locomotives, and by far the best-selling
cab unit of all time. In fact, more F7s were built than all other F-units combined. The F7 succeeded the
F3 model in GM-EMD's F-unit series, and was replaced in turn by the
F9. Final assembly was at GM-EMD's
La Grange, Illinois, plant or GMD's
London, Ontario, facility. There was no F4, -5 or -6 model; "7" was chosen to match the contemporary twin-engine
E7, and was also applied to the new
GP7 road-switcher.
The F7 differed from the F3 primarily in internal equipment—mostly electrical—and some external features. Its continuous
tractive effort rating was 20 percent higher, e.g. 40,000 lbf (180 kN) for an F7 with 65 mph (105 km/h) gearing, compared to 32,500 lbf (145 kN) for an F3 with the same gearing.
Many F7s remained in service for decades, as railroads found them economical to operate and maintain. However, the locomotive was not very popular with yard crews who operated them in switching service because they were difficult to mount and dismount, and it was also nearly impossible for the engineer to see hand signals from a ground crew without leaning way outside the window. As most of these engines were bought and operated before two-way radio became standard on most American railroads, this was a major point of contention. In later years, with the advent of the "road switchers" such as the
EMD GP7, F-units were primarily used in "through freight" and "
unit train" service where there was little or no switching to be done.
Engine and powertrain
The F7's
prime mover is a 16-cylinder
567B series
diesel engine developing 1,500 hp (1.1 MW) at 800 rpm. The 567B is a
mechanically aspiratedtwo-stroke design in a 45-degree
V engine configuration, with 567 cu in (9.29 L) displacement per cylinder, for a total of 9,072 cu in (148.66 L). A direct current generator that is mechanically coupled to the
flywheel end of the engine powers four
traction motors, with two motors mounted on each
Blomberg B truck. EMD has built all of its major components since 1939.[1][2][3][4]
Identification
There are no easily identifiable differences between late F3 production and early F7 production; the major differences were all internal electrical system changes. However, no F7 had the "chicken wire" grilles seen on most F3s, and no F3s had later F7 changes described below under Phases.
The F9 is distinguishable from the late F7 by having five, rather than four, carbody center louver groups covering the carbody filters. The additional one is placed ahead of the first porthole, where F7s have no openings. The F9's greater power output, of course, cannot be seen from the outside.
There were also two main classes of F7s: passenger and freight. Most passenger units had upper and lower headlights, but there were exceptions. Many freight units had the upper
Mars or Pyle brand warning light as well. And some passenger units only had a single upper headlight, i.e. the Pennsylvania. Many units eventually had the upper lights or the door light removed/plated over and the Mars/Pyle light removed. These early warning lights had a motor and linkages that often required maintenance in the shops.
Rebuilds
Several F7s were rebuilt by
Morrison–Knudsen as F9PHs and used in passenger operations. Others were rebuilt as the "
FP10" and used by the
Massachusetts Bay Transportation Authority for their
commuter rail service. In addition, the Santa Fe had 190 of their F7As rebuilt into
CF7 hood units in the 1970s. Only one original F7 unit from the railway exists to this day.
In the early 2000s, a single unpowered EMD F cab unit #7100 (ex-Baltimore & Ohio Railroad F7 #4553) operated on
MARC, occasionally substituting for a cab car. In addition to serving as an all-purpose control unit, it also had a head-end power generator that supplied electricity to the train.[5]
Western Pacific F7A 913: This engine is currently listed as serviceable.
Atchison, Topeka & Santa Fe No. 347C GM-EMD 1949 F7A was given as a gift to the museum by Santa Fe in March 1986 and is repainted to original warbonnet colors. Currently operable.
Southern Pacific No. 6402 GM-EMD 1952 F7A was also given as a gift by the Pacific Coast Chapter of the Railroad and Historical Society in June 1978. Part of the locomotive has since been cutaway to display the inner workings of a diesel locomotive.[16]
The
Galveston Railroad Museum owned F7As Texas Limited #100 (ex-Southern Pacific #6379) and #200 (ex-Southern Pacific #6309). This duo headed the "Texas Limited" passenger train which made runs to and from Houston until track speed restrictions and liability insurance costs ended operations. [when?] Both units were scrapped in 2011 after extensive damage resulting from being submerged in saltwater after
Hurricane Ike. The museum now owns 2 more F7's, #315 and #316, which are both painted in ATSF warbonnet colors. Both units are ex-Southern Pacific, #'s 6443 (315) and 365 (316); they have parts salvaged from the Texas Limited units.[19]
Marre, Louis A. (1995). Diesel Locomotives: The First 50 Years: A Guide to Diesels Built Before 1972. Railroad Reference Series. Waukesha, Wisconsin:
Kalmbach Publishing.
ISBN978-0-89024-258-2.
Solomon, Brian (2010). Vintage Diesel Power. Minneapolis, Minnesota: MBI Publishing.
ISBN978-0-7603-3795-0.
Solomon, Brian (2011). Electro-Motive E-Units and F-Units: The Illustrated History of North America's Favorite Locomotives. Minneapolis, Minnesota: Voyageur Press.
ISBN978-0-7603-4007-3.
Solomon, Brian (2012). North American Locomotives: A Railroad-by-Railroad Photohistory. Minneapolis, Minnesota: Voyageur Press.
ISBN978-0-7603-4370-8.