The Piuma was designed to be an inexpensive, easy-to-fly and easy-to-build
ultralight motor glider.[1] The first model was initially just called the Piuma, but as other models were developed it became known as the Piuma Original.[7]
The Piuma is constructed from wood and finished with
dopedfabric. The semi-tapered 11.89 m (39.0 ft) span wing is supported by a single
lift strut on each side and has
air brakes. The engine is mounted behind the
cockpit. The specified engine is the 22 kW (30 hp)
KFM 107er, but engines of 15 to 22 kW (20 to 30 hp) can be fitted. The
landing gear is of
tricycle configuration and made from steel with rubber shock-absorbers, with an auxiliary tailwheel and fits
wheel pants to reduce drag. The tail is
cruciform. The aircraft has a
glide ratio of 17:1 at 64 km/h (40 mph). Cabin width is 58 cm (23 in)[1][7]
The designer estimated that it would take a builder 1000 hours to complete the aircraft from the plans. The plans cost
US$220 in 1998 and included a 30-page construction manual.[1][6]
Variants
Piuma Original
Initial version with 11.89 m (39.0 ft) span wing, first flown in 1990. Eight reported completed in 2003.[1][2][3][4][5][7]
Piuma E
Improved model with
glide ratio of 20:1 at 71 km/h (44 mph) and other refinements.[1]
Piuma Evolution
Improved model with a wider cockpit, more streamlined fuselage, redesigned tail, new lift struts, electrically retractable nose wheel. main landing gear made from a wood/
fibreglass sandwich and a more reclined seat. Four reported completed in 2003.[3][4][5][8]
Piuma Tourer
Model optimized for cross country powered flight with shorter wing of 10.39 m (34.1 ft) and a
NACA 4415
airfoil used in the rectangular portion of the wing and a NACA 2R1-12 airfoil in the tapered
wing tip. Cruises at 135 km/h (84 mph) and has a 10:1 glide ratio. One reported completed in 2003.[3][4][5][9]